Can ClassicBond EPDM Be Laid Over Existing Roof Coverings? - Needs Work

ClassicBond EPDM can be installed onto a range of existing roof coverings but some surfaces require contact adhesive to be used for the entire roof surface not just the perimeter. 

Important: ClassicBond should not be used to overlay any Bituminous substrates such as Felt and Asphalt. For these substrates you will either need to overboard the existing substrate or use one of our Overlay systems: Arboflex, Resitrix & ClassicBond Pro.

ClassicBond EPDM can be used on the following substrates:  

Bonding Surface Adhesive
Timber Under 100sqm Water Based Adhesive
Timber Over 100sqm  Contact Adhesive or Spray Contact
Glass Contact Adhesive or Spray Contact
GRP Contact Adhesive or Spray Contact
Tissue Faced Insulation Contact Adhesive or Spray Contact
Metal Contact Adhesive or Spray Contact
Concrete Contact Adhesive or Spray Contact

If you have any further questions about this please send us an email to Office@rubber4roofs.co.uk or drop us a call on 02477590349.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.