Primer

Classicbond EPDM Primer

Classicbond EPDM Primer is used to bond tapes and accessories to the rubber membrane. These include the following:-

  • 12" Flashing Tape
  • 9" Flashing Tape
  • 6" Covertape
  • 3" Splice Tape
  • Pipe Boots
  • Internal Drains
  • The sizes available are 0.25L, 0.5L, 1L and 3.78L.

How is the Primer Installed?

Apply to EPDM membrane, NOT the tape directly, using a paint brush or scrub pad. Make sure the Primer does not puddle and is installed evenly.  Make sure the Primer is bone dry before applying the tape or accessories onto it.

How far will a 0.25L cover?

Coverage- 6.5m of 3" Splice Tape (For Both Sides)

Coverage- 6.5m of 6" Covertape

Coverage- 4.5m of 9" Flashing Tape

Coverage- 3m of 12" Flashing Tape

https://www.rubber4roofs.co.uk/how-to-waterproof-an-internal-corner-on-an-epdm-rubber-roof


Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.