ClassicLiquid Top Coat

General Information about ClassicLiquid

  • Fast, single coat application
  • Durable, excellent weather and UV resistance
  • Quickly weatherproof - Fast curing & showerproof in 30 mins. Traficable in 24 hours.
  • Complete protection - Seamless finish 
  • Flexible - Remains elastic down to -40°C 
  • Easy - Self levelling
  • 10, 15 or 20 Year warranty
  • Sold in 15kg tins
  • Covers 1.5kg per sqm for the 10 year warranty.
  • ClassicLiquid Primer must be applied to all surfaces prior to the application of the waterproofing membrane, allow to fully dry. Apply Primer at a sufficient coverage rate to seal the surface. 
  • Any gaps in the substrate over 2mm wide or movement joints must first be filled with ClassicLiquid Joint Mastic prior to the application of the ClassicLiquid Detail Coating.
  • If the membrane is to be installed over timber decks, OSB3 T&G 18mm must be used. The  joints must first be “glued” together by applying Joint Mastic into the gaps. Boards are then pushed together and surplus Joint Mastic tooled smooth. The joints must then be reinforced by applying the Self Adhesive Tape equally across the joint. It is recommended to create a fillet or cant strip using Joint Mastic at the base of all up-stands.
  • https://www.rubber4roofs.co.uk/shop/classic-liquid-top-coat-15kg

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.