Flexitec How to Manually Price

•          To find out the total m² - multiply the length and width and this will give you the total m² i.e. 6 x 3 = 18 m²
•          You will now add 10% to allow for wastage. You will multiply the total m² and 10% wastage i.e. 18m² x 1.1 = 19.8(you will round up to the nearest whole                       number i.e 20)
•          You will now have the total square metre and ready to work how much matting is required – go to step 2

Available in 225g rolls of 5, 10, 15, 20, 25, 30 and 120

•          You would choose the relevant roll required i.e. 20 m² you would choose 20 m² roll

•          You will now work out how much primer is required. Go to step 3

Rolls of 27 and 110 linear metres (LM)

•          Taping is used for reinforcing OSB and joints
•          You will multiply the total (m²) by 1.25 (LM) i.e. 20 m² x 1.25 =25 (LM) therefore 1 roll of 27 LM will be required. You will now work out how much                     primer is required. Go to step 4

Standard – 2.5kg

Standard – 5kg

Metal – 4kg

•          You will choose the relevant substrate and coverage (kg/m²) from the list below and calculate the amount of primer required
•          You will multiply the total square metre (m²⁾  by the substrate coverage to find out the amount of primer required i.e. if the customer’s substrate is ‘asphaltic – smooth –                 0.19 kg/m²’ i.e 20 m² x 0.19 = 3.8. You will then select the correct size tins from the left-hand side of the chart and workout how many tins are required. Go to step 5

Light Grey – 10kg

Dark Grey – 10kg

Light Grey – 20kg

Dark Grey – 20kg

•           You will choose the relevant substrate and coverage (always kg/m²) from the list below and calculate the amount of resin required. Remember 1^st coat 10-year              life expectancy and 2^nd coat 20 year guarantee

•           10 Year Guarantee- you will multiply the total m² by the substrate coverage to find out the amount of resin required i.e. the customer’s substrate is ‘asphaltic –            smooth – 1.2 kg/m²’ i.e 20 m² x 1.2 = 24
•           20 Year Guarantee - you will add the 1^st coat and 2^nd coat kg together i.e 1.2kg + 0.7kg = 1.9g. You will then multiply the total 1.9 against the 20 m² = 38 (kg)
•           You will then select the correct size tins from the left-hand side of the chart
•           You will now workout Hardener Go to step 6

Resin

Primer

•           You will add the total liquid weight of the primer and resin together and multiply against the temperature range (2% or 3% or 4%) to find out the number of tubs                          required i.e. 3.8 (Primer) + 38 (Resin) = 41.8 x 3% = 1.254, you round up to the nearest tub therefore, 2 tubs will be required

Primer & Resin

•           Resin 20 kg – 2 x Flexitec resin accelerator
•           Primer 5kg – 1 x Flexitec primer accelerator
•           Resin 10kg – 1 x Flexitec resin accelerator
•           Go to Point 8