GRP 1010 Resin Base Coat

  • 1GRP ROOF 1010 Base Coat Roofing resin is used in conjunction with chopped strand matting to create a seamless waterproof layer prior to application of GRP1010 Top Coat..

Coverage When Used With 450 GSM Matting

  •   5Kg Tin - 3.8 m2 (Allowing 10% waste)
  • 10Kg Tin - 7.6 m2 (Allowing 10% waste)
  • 20Kg Tin - 15.2 m2 (Allowing 10% waste)

Coverage When Used With 600 GSM Matting The thicker matting option uses more resin to wet out

  •   5Kg Tin - 2.8 sqm (Allowing 10% waste)
  • 10Kg Tin - 5.7 sqm (Allowing 10% waste)
  • 20Kg Tin - 11.4 sqm (Allowing 10% waste)
  • Available in 5kg,10kg and 20kg tins.
  • Simple and quick installation with a waterproof finish that is proven to last.
  • Fire tested to BS 476-3:2004 with an BROOF(t4) and F.AB result meaning unrestricted use under Building Regulations.
  • Cold applied for maximum safety - no risks from open flames and other hot works 
  • Suitable for application in temperatures as low as 5°C or as high as 30°C
  • Manufactured to ISO 9001 and ISO 14001 standards for consistent quality 

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.