Flexitec 2020 Primer

  • Flexitec 2020 Primer is Used to prime roof surface prior to application Resin
  • Available in 2.5kg & 5kg tins 
  • Flexitec 2020 Primer is recommended for all porous, bituminous, cementitious, timber and PVC single ply substrates.
  • Failure to prime porous surfaces, such as concrete, brickwork, tissue-faced insulation or plywood may result in an under-cure of the Flexitec 2020 resin and potential system failure.
  • GRP surfaces, including ResTrims, DO NOT require priming.
  • The primer should be applied in dry conditions between 5°C and 30°C ambient air temperature.
  • Flexitec 2020 Primer is applied at a coverage rate of 3.5 to 5.3m2/kg depending on surface roughness.
  • Please refer to our coverage table on our website if you are struggling. https://www.roofdepot.co.uk/shop/flat-roof-materials/grp-glassfibre-roofing/flexitec2020/primer

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.